Cork Plaster

AeroCork™is a Cork Insulation Plaster for internal walls, that is trowel applied in a single coat from 3mm, and up to 5mm, over existing plastered or painted surfaces, to improve thermal surface temperature and control condensation to stop black mould.

Performance & Coverage

Thermal conductivity (lambda): 0.04 W/mK

Thermal resistance: 0.85 – 0.87 m²K/W

Acoustic reduction: Up to 38dB

Fire classification: Bs2d0 and Broof (t1)

These figures position AeroCork™ as the best high-performance cork internal insulation solution for both residential and commercial environments, globally.

AeroCork™ is installed between 3-5mm in one coat.

AeroCork™ covers approx. 3.5m2 per bucket at 3mm (7kg bucket) Multiple coats are optional to build further thicknesses. Layers between coats must be dry.

Please note: Trowel apply vertically from ceiling to floor. Do not attempt to trowel lines out. This material cannot be finished by trowelling up, any trowel lines must be removed once dry, before plastering over. Install vertically, flatten and move.

Please see installation guide before use.